Skip to content

Author: Janez Babšek 🇫🇮

Zadnji dan v Finski šoli

Danes smo bili zadnji dan v šoli, kjer smo podpisali še zadnje papirje in se poslovila od profesorja ki je menil da sva bila uredu učenca ter tudi jaz mislim

Working for the last day and visiting the electric department in school

Today we were working the last day in the school and did some turning on lathe machines with the immigrant class that means they are from foreign countries. They are

Tampere town

Water cutting and robotics

Today we saw the water cutter cut 4 gears which were drawn in 3D model program used for the machine. First the machine has to warm up the oil in

Pneumatics assembly work in school

Today I was assembling the pneumatics. I first looked at the drawing and then started to connect the air wires together, the pressure was around 0,3 bar. First I connected

The start of last week in Finland school

Today I went to school and did some welding practice with MIG (MetalInvertGas) process. I think this process of welding is the most common and popoular to use beacuse it’s

Deseti dan praktičnega izobraževanja pri delodajalcu na Finskem

Danes je bil zadnji dan praktičnega izobraževanja pri delodajalcu, opravljal sem enaka dela kot prejšnje dni. Se pravi brušenje obdelanih površin s ročno brusilko da so gladke. Povrtal luknje s

Deveti dan praktičnega izobraževanja pri delodajalcu na Finskem

Danes sem brusil robove obdelanih povrsin s ročno brusilko in sicer robove pod kotom 45° da je bil rob gladek. Kose sem nato opral v stroju za pranje. Nato  

Osmi dan praktičnega izobraževanja na Finskem

Danes sem večinoma čistil in brisal kose, katere je bilo potrebno očistiti saj se v stroju za pranje kosov nabere umazanija in potem kos ne pride ven popolnoma čist in

Sedmi dan praktičnega izobražovanja na Finskem

Danes smo odšli zjutraj do firme blizu pri kateri se kosi barvajo. Šli smo zato, ker kos ni bil zadosti očiščen in se zato barva nebi zadosti oprijela na nečisto

Šesti dan praktičnega usposabljanja pri delodajalcu na Finskem

Danes sem brusil robove pod kotom 45 stopinj z ročno brusilko, kjer je bil kos obdelan. Kosu sem moral tudi narediti posnetje lukenj z ročno vrtalko da je bil rob

The fifth day of work practice

In the fourth day we did some grinding on parts for forestry machines we grinded away the scrape metal parts and then wash it in hot water and put the